| | |
|
| |
| | |
|
|
263947 TITAN-T BALL BEARING MANUAL LATCH (LUBRICATED TYPE)
TITAN-T BALL BEARING MANUAL LATCH (LUBRICATED TYPE)
Features and Benefits:
-
Titanium Construction
25% weight reduction provides greater tactile response and reduced hand and wrist fatigue. Superior strength and corrosion-resistance of titanium proven better withstand the damaging effects of heat sterilization.
-
System Flexibility
100-5,000 or 100-20,000 rpm (depending on motor) speed range capability, requiring only a minimum of attachments to meet a variety of procedural needs.
-
LubeFree
Motor, Straight Nose Cone, Motor-to-Angle Adaptor, Torque Multiplier and Angles are LubeFree, which reduces maintenance time and the high cost of repeated lubrication.
-
360° Quick Connect Swivel
Reduces tubing drag for optimum operator comfort. Redesigned for easier disconnection of the handpiece for sterilization.
-
Better Performance Under Load (Torque)
Less likely to stall under higher torque requirements than other low speed handpiece systems.
-
Chairside Repairable Angles
minimized operator downtime and reduces cost relative to other low speed handpiece systems.
Specifications:
Construction: Titanium (Titan-T) - Stainless Steel (Titan 3)
Speed Range: 100-5000 rpm, 5000 rpm Speed Motor
100-20,000 rpm, 20,000 rpm Speed Motor
Recommended Air Pressure: 40 psi at swivel interface
Air Flow: 2.1 SCFM @ 40 psi at maximum power output
at swivel interface
Sterilization: Steam Sterilization up to 275°F (135°C)
Rotation: Forward and Reverse
Lubrication: Not required for LubeFree motor and attachments;
daily for lubricated angles
|
Dental Application Guide for the Titan Handpiece Systems
|
| Procedure |
System Configuration Options |
Operating RPM Range |
| Prophy |
5,000 RPM Motor + Motor-to-Angle Adaptor + Five Star Prophy Angle
20,000 RPM Motor + Torque Multiplier +Motor-to-Adaptor + Fiver Star Prophy Angle
|
1,000-3,000
1,000-3,000
|
|
Grinding and Trimming
(Denture work, crown, and bridge work, adjustment, disking, fabrication and trimming of temporaries)
|
20,000 RPM Motor + Straight Nose Cone |
10,000-20,000 |
| Post and Pin Drilling |
5,000 RPM Motor + Motor-To-Angle Adaptor + Ball Bearing Auto Latch Angle OR + Ball Bearing Auto Latch Angel
20,000 RPM Motor + Torque Multiplier + Motor-to-Angle Adaptor + Ball Bearing Latch Angle OR + Ball Bearing Auto Latch Angle
|
1,000-5,000
1,000-5,000
|
| Pin Setting |
5,000 RPM Motor + Motor-to-Angle Adaptor + Ball Bearing Auto Latch Angle OR + Ball Bearing Auto
20,000 RPM Motor + Motor-to-Angle Adaptor + 10:1 Gear Reduction Latch Angle + 10:1 Gear Reduction Latch Angle
20,000 RPM Motor + Torque Multiplier + Motor-To-Angle Adaptor + 10:1 Gear Reduction Latch Angle
|
1,000-5,000
500-2,000
500
|
Finishing
cavity and crown preps |
20,000 RPM Motor + Motor-to-Angle Adaptor + Ball Bearing Friction Grip Angle OR + Ball Bearing Autochuck Friction Grip Angle OR + Ball Bearing Latch Angle OR + Ball Bearing Auto Latch Angle |
10,000-20,000 |
Polishing
Amalgam, composites, gold margins |
20,000 RPM Motor + Motor-to-Angle Adaptor + Ball Bearing Latch Angle OR + Ball Bearing Auto Latch Angle |
10,000-20,000 |
Endodontic
Canal enlargements (using Gates-Glidden drills) and sealing (using Lentulo), debridement (using files reamers) and reamers |
20,000 RPM Motor + Motor-to-Angle Adaptor + 10:1 Gear Reduction Latch
Angle
5,000 RPM Motor + Motor-to-Angle Adaptor + Auto Latch Endodontic Angle
for Standard Files & Reamers
(90° Reciprocating Motion)
OR
Manual Latch Endodontic
Angle Latch Type Files &
Reamers (90° Reciprocating
Motion)
|
500-2,000
350-5,000
|
Endodontic
Condensing gutta percha |
20,000 RPM Motor + Motor-to-Angle Adaptor + Ball Bearing Latch Angle OR + Ball Bearing Auto Latch Angle |
10,000-20,000 |
Endodontic
Root Canal Filling |
5,000 RPM Motor + 16:1 Contra Angle Attachment + Ball Bearing Manual Latch Angle OR + Ball Bearing Auto Latch Angle
20,000 RPM Motor + Torque Multiplier + 16:1 Contra Angle Attachment + Ball Bearing Manual Latch Angle OR + Ball Bearing Auto Latch Angle
|
300
300
|
| Caries Removal |
20,000 RPM Motor + Torque Multiplier + Motor-To-Angle Adaptor
+ Ball Bearing Autochuck Friction Grip Angle OR + Ball bearing Latch Angle OR + Ball Bearing Friction Grip Angle OR + Ball Bearing Auto Latch Angle
5.000 RPM Motor + Motor-to-Angle Adaptor + Ball Bearing Autochuck Friction Grip Angle OR + Ball bearing Latch Angle OR + Ball Bearing Friction Grip Angle OR + Ball Bearing Auto Latch Angle
|
2,000-5,000
2,000-5,000
|
Item Number:
263947
Manufacturer:
STAR DENTAL
|
|