Rotograph Evo 3D

Rotograph Evo 3D
Rotograph Evo 3D is a new dental imaging system with 3-in-1
functionality: Panoramic, Cephalometric, 3D. This new machine is based
on the highly regarded mechanical platform of the Rotograph Evo, adapted
mechanically and electronically to operate with the latest "Cone Beam"
technology allowing 3D reconstruction of the jaws.
Core of the Rotograph Evo 3D is the innovative Flat Panel Detector (FPD)
using Amorphous
Silicon technology associated with Cesium Iodide (CsI) scintillator.
Thanks to its peculiarity to work in either Panoramic or 3D modality,
Pan images are acquired directly and not reconstructed from a volume,
while the unit's 3D Field of View of 8,5x8,5 cm allows to obtain the
entire dental status of the patient in a single exposure.
The Rotograph Evo 3D can also be integrated with a digital Cephalometric
arm, or upgraded at a later stage in case of need, in order to expand
applications to the orthodontic field.

Customizable according to user's needs
The Rotograph Evo 3D can be customized for professionals needing by
acting on its Examination Modules. Particularly, a Cephalometric arm can
be mounted to integrate the Pan and 3D views with Ceph analysis. The
Evo Xp Examination Module further enlarges the traditional Panoramic
views, not limiting the 2D imaging to the Standard Panoramic projection.

A complete diagnostic tool
Thanks to its Field of View (FOV) of 8,5x8,5 cm, on the Rotograph Evo 3D
the entire dental status can usually be visualized with a single, fast
exposure, with images ready to be archived and treated with Dental
Studio Software. Alternatively, should the user prefer to export the
acquired images and use a 3rd party Software, Dental Studio can easily
give as output the full set of slices in DICOM format. Differently, when
the system is used in Panoramic or Cephalometric mode, the images are
acquired directly in bidimensional format and not reconstructed from the
3D volume; as a consequence, they are therefore displayed with the
typical standard 2D layout.

Simple to operate
Despite its huge technologic content, the Rotograph Evo 3D is extremely
easy to operate. All commands and functions are given through its main
keyboard mounted directly on board, in order to be able to set the
machine right during the patient positioning phase. Alternatively, all
commands are replicated on the virtual keyboard available on the
workstation, where a specific guided procedure will drive the user for
an appropriate system setting, starting from exam selection till setting
of exposure parameters.

Fast and accurate
The fully-integrated Pan-3D detector is always ready to use, without
need to operate on it to switch from Pan to 3D acquisition modality: the
machine commutes automatically from 2D to 3D simply by acting on the
user interface. Additionally, as long as the Field of View allows to
commonly see the entire dentition, the user can save the time needed to
position the patient on a specific tooth. Finally, the limited X-ray
time makes the entire procedure faster, while reducing the radiation
dose.

Accessible to any patient
Rotograph Evo 3D allows an easy access to any kind of patient, including
also wheelchairs bound patients, surpassing the accessibility limits
and restrictions given by systems requiring the patient to seat on an
integrated chair or laying on an integrated bed.

Technical Data